A. RESISTOR
Serves as a barrier. characteristics are the small black letters with a symbol R.
series resistor can be made single or double. installation and use a blower pelepasanya
negative positive pole mounting can be done back and forth.
2. CAPACITORS
There are two types of capacitors:
a). Mylar capacitors, installation can use a blower with alternating poles.
b). Elko capacitors, installation using a blower, but the positive and negative poles
should not be reversed. characteristics of chocolate and yellow occupies one component,
brown color of the positive pole and negative pole yellow. function as the current store
(capacitors denoted by the symbol C).
3. DIODE
serves as a rectifier currents. characteristics of black-white distinctions where white
shows the positive pole while the black color indicates a negative pole. unloading process pairs
using a blower where pemasanagan this component should not be reversed.
Jumper technique is one way that is in use to connect an electronic path is disconnected. This could be due to rupture path through such a strong vibration when your hp falls. or because of other things that can cause electronic breakdown lane.
jumper before you use this technique, you need to consider very thin wires which are used as thin as hair. try the cable is covered by an insulator (I use double-sided tape to wrap the cable to the jumper) to minimize the occurrence of short circuit. try the cable is not too long because in addition to the risk of short circuit, as well as it will provide an increasingly large obstacles. jumper to do this technique, you should check where the broken lines with analog multitester. to determine where to start, you must have a path that can book you buy on HP spare parts shop or bookstore to provide it in accordance with the type of mobile phone.
after checking and making sure that the path is disconnected you can only do the techniques jumper.
